Bharat Ka Dusra Lal Killa 😱😱✌✌

Darbhanga Fort

Darbhanga Fort
Darbhanga, Bihar




















Darbhanga Fort which is also known as 2nd Lal Quila Of India because of its Architectural similarities with the Red Fort in Delhi.  

adding into this Darbhanga Fort is more popularly known as Ram Bagh Fort. because it is situated in Rambagh Palace inside the fort. Rambagh campus is surrounded by walls and spreads in about 85 acres of land.

Interesting Facts About Darbhanga Fort

1) It is a symbol of Mithila Culture having great architectural works and walls. It was built up using red bricks and the walls are 1 km long and 500 meters wide. A pit was constructed around the wall within the fort. It was filled with an equal level of water in order to protect the fort and the Raj family.

2) Despite being an iconic tourist spot, very few people know that Darbhanga Fort is 9ft, higher than Lal Quila, New Delhi. During the construction, thousands of artisans were employed by a Calcutta based company to build the walls.




3) In the memory of this historic moment, the construction of Darbhanga Raj Fort was started in 1934. A company of Calcutta was contracted to build the fort.

4) The main gate of the fort is called the Sinhala, but rare scenes from architecture have been scattered. The ditch was constructed around the wall within the fort. It was filled with equal water in the trench. It was done for the protection of the fort and, in fact, the Raj family. 



















To Visit 
Darbhanga Raj Fort  visit travelraasta.com
Follow our blog to get the latest blogs about travel and do comment on your views in the comment section ❤👌.


Written By-
Ms. Snigdha Jha 

Post a Comment

2 Comments

  1. Why casinos are rigged - Hertzaman - The Herald
    In https://septcasino.com/review/merit-casino/ the UK, casino games are rigged and there is evidence 바카라 사이트 of fraud, crime or disorder or an wooricasinos.info individual's involvement. https://octcasino.com/ There sol.edu.kg are also many

    ReplyDelete
  2. While some companies must churn out merchandise in the thousands or millions, different companies want to supply a comparatively small variety of items or produce items on-demand. On my Ultimaker S5 , it will take 29 minutes to 3D print one brick, or about two an hour. Filling the big build plate, it's possible to print sixty five bricks without delay, however the course of will take in the future, seven hours, and 39 minutes to complete. While some slicers can be operated programmatically by simply passing a 3D mannequin file into it and getting G-code output, most slicers right now enable for a fully interactive interface. This permits the operator to regulate print precision machining orientation and examine the print course of layer-by-layer in order to to} locate potential print issues earlier than a print is sent to the printer. If find a way to|you probably can} draw a rectangle in PowerPoint, you can use use|you must use} a CAD program to make simple designs.

    ReplyDelete